cabinsale
ดู Blog ทั้งหมด

Shower room glass frosted effect

เขียนโดย cabinsale
       With the development of the economy and the progress of science, the glass industry is also making continuous progress. While developing new varieties, it also strengthens the original types of glass. Various types of deep-processed glass gradually replace ordinary flat glass and shine in their respective application fields. In order to be able to decorate and make a glass shower room with better quality and reasonable price, we need to have a certain understanding of it, come with me to see it.
 
       First, the specific installation steps of the glass shower room 1. Prepare the necessary tools. 2. Install the bottom basin: Combine the bottom basin parts, adjust the bottom basin level, and ensure that there is no water in the basin and the bottom of the basin. The hose can be extended and retracted with the distance to square shower enclosure
firmly connect the basin bottom with the floor drain. 3. Testing and protection: After installation, it is necessary to conduct a water test to ensure that the water is unobstructed. Fourth, locate and drill holes: use a pencil and a spirit level to determine the drilling position of the aluminum material against the wall, and use an impact drill to drill the holes. 4. Install the aluminum material: Knock in the rubber particles at the drilled hole, and lock the aluminum strip to the wall with screws. 5. Fix the glass: Clamp the glass to the bottom hole and fix it with screws.

       6. Install the jacking pipe: Find the corresponding position above the fixed glass to drill holes, install the (straight/oblique) fixing seat and connect the jacking pipe. Secure it to the top of the glass with an elbow sleeve. 7. Install the shelf: install the shelf at the correct position, tighten the nut of the laminate, and fix the glass of the laminate to keep it vertical and horizontal. Note that waterproofing is done under the aluminum that holds the glass. 8. Install the movable door: install the hardware of the movable door, and install the hinge at the reserved hole of the fixed door. After installation, adjust the position of the axis of the lotus leaf until the door feels good when closing.
   
      9. Do a good job of waterproofing: install suction strips or water-retaining strips on the side or under the glass as required. Use silicone to seal the joints between the aluminum and the wall, glass and the bottom basin. 10. Debugging and tightening: Check whether each part is comfortable and smooth to use, and adjust it in time if any problem is found. After adjustment, tighten the corresponding screws to make the entire shower room more secure. 11. Finishing work: clip the decorative aluminum strips into the wall-mounted aluminum material to ensure its appearance is neat and generous. Afterwards, wipe down the entire shower room with a rag

ความคิดเห็น

ยังไม่มีความคิดเห็น