The control device and accessories of the tank equipment should be installed correctly according to the instructions, and the installation should be checked. It is best to install the batching tank brewery equipment
under the guidance of professionals.
The tank body of the batching tank should be installed at a level and stable. It is best to conduct a trial run for a few seconds before using the batching tank to check whether the tank can operate normally.
After confirming that there is no electrical short circuit or abnormal sound, a short trial run can be performed. Before using the batching tank, check whether the equipment is severely damaged or deformed.
Whether the meter is correct, whether the pipeline is unblocked, and whether there is damage. After the batching tank equipment is in normal operation, check the bearing temperature, running stability, tightness, etc.., and whether the instrument is normal. If everything is correct, the batching tank equipment can be put into production.
If the batching tank is equipped with a mechanical seal, an appropriate amount of oil must be injected into the lubrication tank of the mechanical seal before the tank body is started, and cooling water must be introduced into the cooling cavity of the mechanical seal, so that the mechanical seal device can get good lubrication and cool down.
After the batching tank is installed, please check whether there are any objects or personnel affecting the operation inside and outside the tank before starting the tank body to avoid danger.Check whether the fittings of the equipment are firmly installed and whether there is any looseness